• Why is the camera not charging?

  The Power Source is set to Battery by default, and the status LED turns solid blue while charging. Please charge the device with standard 5V/1A or 5V/2A chargers and the included charging cable.Change to another power adapter if not working. For charging with solar panels, make sure your solar panel is installed correctly, and the panel gets enough sunlight. If the methods above are not working, please connect support@nooriolife.com with your device'sPopular

• How do I charge the camera's battery?

  Charging a rechargeable camera Use the power adapter and cable specified for the exact model. For models rated for DC 5V/2A charging, use a compatible DC 5V/2A adapter and a known-good cable. Always-powered models must remain connected to their specified supply and do not follow battery-charging steps. A deeply depleted battery may not show an indicator immediately. Charge for about 10 minutes and check again. If there is still no response, continue charging until a total of about 3 hours,Some readers

• How do I replace the battery in sensors?

  Replace battery for contact sensors Open the back cover of the sensor and take it off. Install the CR123A battery into the slot correctly. Replace battery for motion sensors Twist theFew readers

• How long can the battery last?

  A fully charged camera or doorbell can last for 3~6 months depending on usage and operating environment, including the frequency of motion-triggered events, the recording duration, network and environmental temperature. For sensors with CR123A batteries,  the battery usually lasts up to two years under normal usage. If the app indicates low battery notifications or the sensor does not power on, please replace the battery. Testing conditions for Noorio battery-powered cameras and doorbellsFew readers

• How to extend the battery life of cameras and doorbells?

  Go to the device's Settings > Power Management and Switch the Working Mode to Battery Saving mode. You can also use Customized Mode and shorten the video length and turn up the retrigger interval. Go to device's Settings > Smart Detection, select Person Only mode for detection types, and lower the Motion Sensitivity. Remember, the device will only record humans and detect fewer events for the above settings. Enhance the Wi-Fi coverage by adding an AP between the device and the routerFew readers

• How long does the battery-powered device last on one charge?

  Battery life varies with the exact camera model, event frequency, recording length, live-view use, wireless signal, temperature and charging conditions. There is no single battery-life duration guaranteed for all Noorio battery cameras and doorbells. Laboratory battery-life figures apply only to the model and test conditions stated in its specifications. They should not be treated as the expected duration for every installation. To reduce unnecessary battery consumption, review repeated eventFew readers

• Noorio App FAQ: Battery, Charging & Solar

  Noorio App FAQ - Battery, Charging & SolarFew readers