Installation

General installation tips

• Mount under an eave/roof or use a shield to protect the camera from direct sun and heavy rain.
• Outdoors, install 7–10 ft (2–3 m) high at about a 15° downward angle for the best field of view.
• Don't block the antenna (top of the camera) with metal.
• Mount in a corner so movement crosses the detection zone.
• Choose a spot with a strong Wi-Fi signal (confirm smooth live streaming there first).

How do I use the mounting bracket?

• Turn the bracket knob clockwise to disassemble it.
• Soft materials (wood/plastic): screw the base directly to the wall. Hard materials (concrete/brick): stick on the positioning card, drill with a 15/64" (5.95 mm) bit, insert anchors, then screw the base on.
• Fasten the ball knob to the base and tighten the camera onto the bracket.

Tools you may need: screwdriver, drill with a 5.95 mm bit, and a ladder.

Using the camera outdoors

Keep the rubber charging-port plug tightly sealed to prevent water entry. Don't leave the charging cable connected in open-air/outdoor settings.

Note on 3M adhesive stickers

Current products no longer include 3M tape or warning stickers (removed for safety/product reasons). We recommend screw installation for a more stable mount.

About the doorbell (D110)

The D110 offers two installation methods — with or without existing doorbell wiring. Protect it from direct sun and heavy rain as with other cameras.

Updated on: 08/07/2026