How to add BF200 (APN has been built into the device)?

Important Note: The device must be added through the Noorio Plus app.

1. Reset the equipment until the equipment broadcasts:

① Welcome to smart cameras, please use the app to add devices.

② 4G network connection, please wait.

2. After the broadcast, click the "+" entrance in the upper right corner and select Add Device.
3. After selecting Add Device, scan the QR code behind the device to enter the code scanning page.
4. Check "Completed the above steps" and click Next to enter the device connection page.
5. Wait for a while until the device side broadcasts: "After the configuration is completed, please use."
6. At this time, the app's device connection page will prompt: "Configuration is initializing, please wait", and it will automatically jump to the add completion page after loading is completed.
7. Select the device name or customize the device name, then click "Start Experience" to jump to the home page (the device can be used normally).

Updated on: 19/03/2026