How to setup CL200?

Please note: The NOORIO CL200 can only be added using the NOORIO Plus app. Scan the QR code below or search for "Noorio Plus" in major app markets, download and install.

NOORIO Plus.jpg

NOORIO Plus Download.png

Method 1:Wi-Fi Distribution Network

Step 1 Select the available 2.4G Wi-Fi hotspot on your cell phone, enter the homepage of the app and click "+". Scan the QR code on the device and select "Wi-Fi configuration".

wifi连接step1.jpeg

Step 2 On the "boot device" interface, check"The above operations have been completed", and click"Next"; On the "Start to configure the network " interface, check "The above operations have been completed", click"Next"; Make sure there is no obstruction between the router, the camera and the mobile phone, and the distance between them is within 2 meters, then click "Next";

Step 3 After entering the Wi-Fi password, click "Next"; Point the mobile phone screen directly in front of the camera lens, with an interval of 15-20 cm. Try not to let the mobile phone shake during the process. After hearing the device prompt tone or indicator light change, click "Hearing the prompt tone or indicator light flashing", and wait for the addition to succeed.

Method 2:Hotspot Distribution Network

Power up the camera and hear the device's voice announcement or indicator light change. Open the app and click the "+" button. Then, scan the QR code on the device. Select " Hotspot configuration" and follow the wizard to find the Wi-Fi network with the prefix "Cloud_xxxx". Once the device is connected to the hotspot, click "Next". Select the Wi-Fi network to be paired, enter the password, and click "OK". Wait for the app to display "Addition Success" to complete device pairing.