How to setup B200-SE/B210-SE（Two ways）？
Wi-Fi Configuration Step1
- Download the Noorio App from the app store, open the app. Scan the QR code on the back of the camera, and click "Set Up a Device." Select "Wi-Fi Configuration (QR mode)."
Wi-Fi Configuration Step2
- Select the Wi-Fi network you want to pair with (Note: Only 2.4GHz networks are supported).
- Press and hold the SYNC button (more than 5 seconds)on the back of the camera until you hear a voice prompt.
- The blinking blue light in the app's picture is just an example, the actual blinking red light also allows for successful pairing.
Wi-Fi Configuration Step3
- Point your camera lens at the QR code displayed on the app, keeping a distance of 6–8 inches. After hearing the camera's prompt, click "Hear the Prompt."Wait for the camera to pair successfully.
Hotspot Configuration Step1
- Download the Noorio App from the app store, open the app. Scan the QR code on the back of the camera, and click "Set Up a Device." Select "Hotspot Configuration (device hotspot)."
Hotspot Configuration Step2
- Select the Wi-Fi network you want to pair with (Note: Only 2.4GHz networks are supported).Press and hold the SYNC button on the back of the camera until you hear a voice prompt.
Hotspot Configuration Step3
- Select "Connect Device Wi-Fi," go to your phone's network settings, and connect to the "Cloud_xxxxxx" network.
Hotspot Configuration Step4
- Return to the app and wait for the camera to pair successfully.
300 KB Download
200 KB Download
300 KB Download
300 KB Download
100 KB Download
100 KB Download
80 KB Download
If the device fails to be added, please refer to: https://closeli-help.closeli.com/en/article/b200-seb210-se-fix-for-network-connection-configuration-failures-1e1qwwj/
Updated on: 07/01/2026