How to install the solar panel?
Installation Tips
- The intake of sunlight impacts the energy produced by the solar panel.
Install the solar panel on the roof or wall outside your house to get maximum sunlight exposure.

- Positon your solar panel south-facing (in the Northern Hemisphere)or north-facing (in the Southern Hemisphere), and adjust its angle at about 30°.

- Dirt or debris on the solar panel can reduce sunlight exposure. Remember to regularly clean the panel.

- The cable of the solar panel is 10ft/3m long, make sure the cable can reach your camera. Otherwise, you have to relocate your camera first.

- Do not extend the cable of the solar panel.Because it might cause a voltage drop and negatively impact the charging efficiency.

Bracket Installation
- Place the bracket against a roof or a wall and secure it with the included screws. To install the bracket on concrete, brick, and other hard materials, drill holes with a 15/65-inch (5.95mm) drill bit and insert anchors first.

- Screw the solar panel to the bracket and adjust its angle at about 30°.

Camera Connection
- Slide a waterproof gasket onto the USB connector of the solar panel.
- Open the rubber cover of your camera's charging port and firmly plug in the USB connector.
Updated on: 07/01/2026