Articles on: Noorio Brand FAQ

How to install motion sensors?

Noorio sensors can only be installed indoors.


Installation Methods


Noorio motion sensors can be mounted with 3M stickers or screws.


Sticker

Screw Mounting


Preparation


Before you mount, you may need a screwdriver, a drill with a 15/65 inch (5.95 mm) drill bit, and a ladder.


add_pic_install1.png


Installations Tips


  1. Please tear off the protective film. Otherwise, it may affect the sensor's performance.


addmotion_pic_install1_2x.png


  1. It is recommended to install the motion sensor on a wall facing or next to an entrance.


addmotion_pic_install2_2x.png


Installation Method 1: Sticker


  1. Tear off one side of the film on the 3M sticker and stick it to the bracket.


  1. Tear off another film of the 3M sticker and stick the bracket to flat surfaces.


addmotion_pic_install3_2x.png


  1. Attach the motion sensor to the bracket and adjust it to an appropriate position.


addmotion_pic_install4_2x.png


Installation Method 2: Screw Mounting


  1. Install on wooden, plastic, and other soft materials: Srew the base of the bracket onto the wall directly.

Install on concrete, brick, and other hard materials: Drill a hole with a 15/65-inch (5.95mm) drill bit. Insert the anchor into the hole and finally screw the base of the bracket onto the wall.


addmotion_pic_install5_2x.png


  1. Attach the motion sensor to the bracket and adjust it to an appropriate position.


addmotion_pic_install6_2x.png

Updated on: 07/01/2026