How to add BF200? (The device has a built-in APN)

①Welcome to use the smart camera. Please add the device through the app.

②4G network connection in progress. Please wait

③ The 4G network connection was successful

After the broadcast is completed, click the "+" entry in the upper right corner and select Add Device

step 2.png

After selecting "Add Device", scan the QR code at the back of the device to enter the scanning page

step 3-1.png

step 3-2.png

Check Completed the above steps, click Next, and enter the device connection page

step 4-2.png

step 4-1.png

Wait for a moment until the voice message on the device reads: "Configuration completed. Please use.

At this point, the app device connection page will prompt: Configuration initialization in progress. Please wait a moment. After loading is completed, it will automatically jump to the addition completion page

step 6-1.png

step 6-2.png

Select the device name or customize the device name. Click "Start Experience" to jump to the home page (the device can be used normally).

step 7.png

Updated on: 08/12/2025

Was this article helpful?

Thank you!